Login - Become a member

Taylormade New Burner 2.0 Irons Review

Forums home -> 3D Studio MAX -> Taylormade New Burner 2.0 Irons Review

post reply

Taylormade New Burner 2.0 Irons Review 
By Alicess on Oct 15, 2012 07:26 AM
The multi-material badge on the back of the taylormade burner 2.0 is also an upgrade over the original Burner's. "It has a softer material integrated with the aluminum which gives it better dampening, in terms of managing vibration," Wahl says. "And in the long-irons, there is a stiff nylon layer of material that you can't see that really helps to improve the sound."

Wahl says that the sound-enhancing layer was not used in the mid- and short-irons, and the badge used is thinner because their heads have thicker faces. wholesale golf clubs They naturally create a more-pleasing sound.

ICP In addition to the badge, on the back of all the taylormade burner 2.0 for saleyou'll see a circular piece of metal that is part of TaylorMade's Inverted Cone Technology (ICT). But once again, it's been upgraded.
"The ICT has been re-shaped and re-positioned slightly in the long-irons in order to ensure the clubs deliver faster ball speeds, but also have consistency on mis-hits," Wahl says.

The soles of the short irons, like the 9-iron, are also thinner than the long irons because golfers swing a 9-iron more vertically into the ball. In contrast, most players sweep the ball using a flatter swing when hitting a 4-iron, taylormade burner 2.0 best priceso a wide sole is beneficial.
Each of the eight iron shafts flexes in a slightly different area, or kick point. This is for the SGI category and we are putting them through a full testing.
Reply with quote

post reply

Page 1 of 1 Go to page: 1
Subscribe to RSS
Follow us on Twitter

 

Copyright © 1996-2010 Raphael Benedet - Contact Us